Demand Charges, Explained With One Ugly Utility Bill

A fifteen-minute peak in July set 38% of one client’s annual electricity cost. Here is how to read that line on your bill.
Adviser and building manager reviewing energy graphs in a control room

Most commercial tariffs bill you twice for electricity: once for the energy you use, and once for the highest fifteen-minute demand in the month. On the bill we unpicked for this briefing, that second line was 38% of the annual cost.

Where the peak came from

Interval data showed the peak landed at 7:15 on a Monday in July: chillers restarting after a weekend shutdown while the morning shift switched on everything else. One quarter-hour set the charge for the month — and, through a ratchet clause, for the next eleven.

What fixed it

  • Staggered start-up of the three chillers, 20 minutes apart
  • Pre-cooling the building on Sunday evening
  • A demand alarm on the main meter at 90% of the target
  • A tariff change the utility offered but nobody had asked for

The result

Peak demand fell by 21% and the annual bill by $96,000, with no capital spent. The tariff review alone recovered a $31,000 refund for past overcharges.

If your bill has a demand line, send us twelve months of interval data. The desk review will tell you whether a peak like this is hiding in it.

Written By

Head of Net-Zero Strategy
Head of Net-Zero Strategy at Kestrel. Margot spent nine years planning grids for a utility before joining in 2017; she turns audit findings into roadmaps a board can fund and writes the Kestrel Brief every month.
All briefings by Margot Ellery
Keep reading

Three more briefings for the budget meeting.

All Insights