What an audit costs, what we need from you, how we stay independent and how savings are measured — answered by the engineers who run the audits, not a sales team.
Six answers per topic, written by the advisers who handle each question on real audits. Anything specific to your site gets a written answer after the desk review.

“If your question is about one plant room or one bill, send it over — I would rather look at your data than guess in a paragraph.”
Both follow the ASHRAE audit procedures. A Level 2 audit surveys every system on site and prices each measure to within ±15% — enough for a capital budget. A Level 3 audit adds metering, logging and detailed engineering on the large measures, for decisions above roughly $1M of capital. Most clients start with Level 2.
Four to eight weeks from the kick-off call. Two engineers spend two to four days on site, depending on the size of the estate; the full pack is delivered in week six for a typical single-site Level 2 audit.
A fixed fee agreed before we start — from $18,500 for a single-site Level 2 audit. The fee depends on floor area, the number of systems and whether you need Level 3 metering. It never depends on the savings we find. See Fees & Packages.
Twelve months of utility bills (interval data if your meter records it), drawings or a site plan, BMS access or exports, and an hour with whoever runs the plant. We send a one-page checklist after the desk review.
No. We work around your shifts and permits, log data with clamp-on meters that need no shutdown, and only open panels with your electrician present. Hospitals, cold stores and data centres stay fully live while we are there.
An 80-page audit report, a measure register in XLSX, a 24-page roadmap, an 8-page board summary and a 12-page M&V plan — signed by a licensed Professional Engineer and checked by a named reviewer who did not do the fieldwork.
No. Kestrel sells advice and measurement only. We hold no stock, own no installer and take no commission from manufacturers, contractors or energy suppliers — it is written into every engagement letter.
A fixed fee per engagement, agreed in writing before work starts. Grant applications and M&V reporting are fixed fees too. Nothing we earn rises or falls with the equipment you buy or the supplier you choose.
We write the specification and help you run a fair tender, then score the bids with you. We never take a referral fee, and we tell you if we have worked with a bidder before.
No — and be wary of anyone who does. We estimate savings to ±15% from measured data, and then we measure what actually happens for at least twelve months. Our clients have averaged a 27% energy cut after twelve months, but your result depends on your site and on which measures you carry out.
The M&V report shows it, month by month. We find out why — a setpoint drifted, a control was overridden, a load changed — and tell you what it takes to recover the saving. Variances are reported, not hidden.
Every report has a named reviewer, a second engineer who did not do the fieldwork, and a PE stamp. Our auditors hold CEM and CMVP certifications, and our lead auditors are ISO 50001 qualified.
A board-ready plan, delivered in about ten weeks, that sets out how your Scope 1 and 2 emissions come down to 2040: which measures, in what order, at what cost, and what is left to cover with clean supply. Each step is priced and dated.
We screen Scope 3 so you know where the big categories sit, but the roadmap itself covers Scope 1 and 2 — the emissions you control directly through your buildings, fleet and energy supply.
We provide the measured energy and emissions data, the method notes and the evidence trail your reporting team and auditors ask for. We do not give legal, accounting or tax advice — your own advisers decide how it is reported.
It depends on your roof or land, your load profile and how long you will occupy the site. We model both against your interval data and show the cost per MWh, the risks and the contract terms side by side.
No. We run a vendor-neutral tender on your behalf and evaluate the offers, but we take no commission from suppliers or developers. Ines Varga’s team has evaluated 40 PPAs this way.
Only for what the roadmap cannot reduce or supply directly. We show the price of certificates against efficiency and on-site options so the board can see what each dollar of carbon reduction costs.
Using the IPMVP framework — usually Option C, whole-facility metering — with the baseline adjusted for weather and production. You get a monthly report showing expected use, actual use and the verified saving.
At least twelve months after the measures are installed, so every season is covered. Many clients keep monthly M&V running for three years to protect the savings as staff and loads change.
Across the audits since 2014 the measures our clients carried out have paid back in 3.1 years on average. Controls and compressed-air fixes often pay back inside a year; plant replacements take longer.
Yes. Priya Raman’s team searches utility, state and federal programmes for every measure and prepares the applications. Clients have secured $380k on average — but eligibility and awards are decided by each programme, not by us.
No. Incentive work is a fixed fee like everything else, so we have no reason to favour one measure over another because of the grant attached to it.
The baseline is adjusted for the change — a new line, a new building, longer opening hours — so the saving you see is still a like-for-like comparison. Every adjustment is listed in the report.
The desk review is free and takes five working days. If an audit makes sense, you get a fixed fee with it; if it does not, we say so and you keep the note.
Thirty minutes with a senior adviser: your sites, your bills and what the board wants to know.
A written note on where the waste probably is, which audit level fits and a fixed fee — free, no obligation.
Two engineers for two to four days: plant survey, loggers on the big loads, interviews with your operators.
Report, measure register, roadmap, board summary and M&V plan — PE-stamped, presented to your team.
Each desk is answered by the team that does the work — Mon–Fri 8:30–18:00 ET. Emails get a reply from a named adviser within one working day.
New audits, desk reviews, roadmaps and fee questions.
Existing clients: monthly reports, baselines and adjustments.
Programme searches, applications and award paperwork.
Media, speaking requests, universities and industry bodies.