Home / Services / Measurement & Verification
FILE KE-S05 · REV. 10/2026
[ Service S-05 ]

Savings you can see,
month by month.

Estimates are where savings start, not where they end. Our M&V desk measures what actually arrived — IPMVP Option C, weather-normalised against the audit baseline and reported every month.

IPMVP OPTION C
MONTHLY REPORTS
WEATHER-NORMALISED
M&V FILE
S-05 · IPMVP
27% MEASURED
Average energy cut measured twelve months after measures went in, across clients on our M&V service.
METHOD
IPMVP Option C
REPORTING
Monthly
LEAD
Samuel Adeyemi, CMVP
 
ON THIS PAGE
01   What you get
02   Service levels
03   The report
04   FAQ
What you get

The number your finance team will sign.

Savings have a habit of fading. A control setting drifts, a contractor overrides a schedule, production grows — and by year two the promised figure has quietly gone. Without measurement, nobody can say which.

We fix a baseline from the audit period, adjust it for weather and occupancy, and compare every month’s metered energy against it under IPMVP Option C. When savings slip, the report says where and when, so the fix happens in weeks instead of at the next budget round.

AVG. MEASURED CUT
27%
IPMVP OPTION
C
REPORTS
12/YR
Analyst reviewing monthly savings charts on two monitors
S-05 · MONTHLY M&V
Metered vs adjusted baseline
FIG. 01 — A monthly verification run · metered energy against the weather-adjusted baseline, site by site
EVERY M&V SERVICE INCLUDES
10 ITEMS
An M&V plan, 12 pages, agreed up front
Baseline from the audit period
Weather and occupancy adjustments
Monthly metered comparison, per site
IPMVP Option C method
Drift alerts when savings slip
A monthly one-page report
An annual savings statement
Review by a CMVP-certified analyst
A yearly results meeting
GOOD TO KNOW
Measured, not guaranteed
PAST RESULTS ARE NOT A FORECAST
Needs reliable metering
WE CHECK METERS BEFORE WE START
Baselines get adjusted
BIG OPERATIONAL CHANGES ARE RE-BASELINED
Not a performance contract
WE MEASURE · WE DON’T UNDERWRITE
Service levels

Measure one project or the whole estate.

Option C works on whole-facility meters, which most sites already have. Where a single measure needs isolating, we add temporary sub-metering.

V-1

Project M&V

One measure or package, verified for twelve months after it goes in.

TERM
12 months
METHOD
Option C
REPORTS
Monthly
OUTPUT
Savings statement
V-2

Site M&V

Every measure on a site, tracked together against one adjusted baseline.

TERM
Ongoing
METHOD
Option C
REPORTS
Monthly
OUTPUT
Annual statement
V-3

Portfolio M&V

Many sites on one dashboard of monthly reports, with drift alerts ranked by value.

TERM
Ongoing
METHOD
Option C
REPORTS
Monthly, per site
OUTPUT
Portfolio statement
V-4

Measure isolation

Temporary sub-meters on a single system when a whole-site meter can’t see the saving.

TERM
As needed
METHOD
Sub-metered
REPORTS
Per period
OUTPUT
Measure result
HOW IT RUNS
Plan, baseline, measure, report.
01
BEFORE
M&V plan
Method, meters and adjustments agreed
02
MONTH 0
Baseline
Fixed from the audit period
03
MONTHLY
Measure
Metered vs adjusted baseline
04
YEARLY
Statement
Savings signed off with finance
Verified cases

Results measured after the fact.

A six-storey medical office building with timber cladding, rooftop solar and planted terraces

Orbis Medical Campus

6 buildings · 2.1M sq ft · 31% energy cut · net zero by 2038
$1.4M / yr
Engineer with a tablet in a data centre cold aisle

Brightwater Data Centre

PUE 1.62 → 1.38 · 14% cut · 8 MW IT load
$1.05M / yr
Adviser and building manager reviewing energy graphs in a control room

Fulton Square Offices

4 towers · BMS re-tune · 1.4-year payback
$860k / yr
The report

What arrives every month.

One page for the board, the detail for the engineers and the data behind both. Every report is reviewed by a CMVP-certified analyst before it leaves Wharf Street.

M&V SERVICE · IPMVP OPTION C
REV. 10/26
ITEM
WHAT IT IS
NOTE
PLAN
M&V plan, 12 pages
Agreed before measures go in
BASELINE
From the audit period
Weather + occupancy adjusted
METHOD
IPMVP Option C
Whole-facility meters
FREQUENCY
Monthly
Per site and portfolio
REPORT
One-page summary
Plus engineer detail
ALERTS
Drift flagged same month
With the likely cause
STATEMENT
Annual savings statement
For finance and auditors
REVIEW
CMVP-certified analyst
Named on every report
FEE
Fixed monthly fee
Agreed before we start
Engineer with a light meter under LED high-bay lights in a warehouse
MEASURED AFTER 12 MONTHS
The average result across clients on M&V.
27%
Average energy cut
3.1YRS
Average payback
FAQ

M&V questions we hear from finance.

Short answers here. Samuel’s team will check your metering on a first call and tell you whether Option C will work for your sites.

Portrait of Samuel Adeyemi
Ask Samuel Adeyemi’s team
Measurement & Verification Lead
PHONE
REPLY
Within two working days

What is IPMVP Option C?

A recognised method that measures savings at the whole-facility meter, comparing actual use with a baseline adjusted for weather, occupancy and other drivers. It suits packages of measures and most commercial sites.

Will M&V guarantee our savings?

No. M&V measures what happened; it doesn’t underwrite it. Across our clients the average measured cut after twelve months is 27%, but that is a past result, not a forecast for your site.

Do you need to install meters?

Usually not — Option C uses the utility or main meters most sites already have. Where a single measure needs isolating, we add temporary sub-meters for the period required.

What if our operations change?

Big changes — a new production line, an extension, a change in hours — are documented and the baseline is adjusted under the M&V plan, so savings aren’t overstated or hidden.

Can you verify measures another firm installed?

Yes. We need the audit or design baseline, the installation dates and meter access. Independence matters most here: we have no stake in the measures looking good.

Who signs off the savings figure?

A CMVP-certified analyst reviews every report and is named on it. The annual statement is written so your finance team and auditors can follow every adjustment.

Next step / Free desk review

Send twelve months of bills. We will tell you where the waste probably is.

FREE · 5 WORKING DAYS · A SENIOR ADVISER CALLS, NOT A SALES TEAM