What a Thermal Camera Sees on a Rooftop Unit

Leaking dampers, failed insulation and hot electrical joints show up in seconds. A walk-through of one roof, unit by unit.
Auditor scanning a rooftop air handling unit with a thermal camera

A thermal camera does not find savings on its own, but it tells an auditor where to look. On a recent office roof with fourteen packaged units, a two-hour thermal walk turned up five findings worth acting on.

What showed up

  • Two economiser dampers stuck open, pulling hot outside air all summer
  • Missing insulation on a supply duct run of 40 metres
  • A failing compressor running 18 °C hotter than its twin
  • One loose electrical joint — a safety issue, fixed the same day
  • A unit cooling an empty floor around the clock

What it was worth

Together the fixes saved about $38,000 a year for under $12,000 of work. The loose joint was not an energy saving at all, but it is the finding the facilities manager talks about.

Thermal surveys are part of every Level 2 and Level 3 audit we run. They take an afternoon and the images go straight into the report appendix.

Written By

Head of Net-Zero Strategy
Head of Net-Zero Strategy at Kestrel. Margot spent nine years planning grids for a utility before joining in 2017; she turns audit findings into roadmaps a board can fund and writes the Kestrel Brief every month.
All briefings by Margot Ellery
Keep reading

Three more briefings for the budget meeting.

All Insights